Systems Engineering Associates, Inc.

Systems Electronics Group, Inc.
14989 W. 69th Avenue Arvada, CO 80007
U.S.A.
Tel: (303) 421-0484
Fax: (303) 421-8108
 
 
Light Testers

The following packages are available for light testers. For price and availability, please contact us.

HSL-LTA: Alcoa Light Tester Pneumatic Reject Control (aluminum can)
HSL-LTS: Alcoa Light Tester Pneumatic Reject Control (steel can)
HSL-RT6-M45: Reynolds (APM) RT-5/RT-6 Light Tester High Speed Control Package


HSL-LTA: Alcoa Light Tester Pneumatic Reject Control (aluminum can)
 
  • Replaces existing odd/even mechanical reject mechanism with a reject blow-off solenoid mounted in the tester discharge track-work.
  • Increases Production - By eliminating the mechanical reject, and thus the limitations of speed imposed by the response time of the mechanical reject mechanism, significant increases in speed can be achieved.
  • Reduced Downtime - Eliminating the mechanical reject eliminates can jams caused by intermittent or poorly operating reject mechanisms thus reducing scrap and downtime to clear can jams in the machine.
  • Reduced Maintenance - Removing the mechanical reject eliminates maintenance issues relating to mechanisms such as worn or sticking actuators, worn air cylinders, etc. Cost of maintaining and time involved in trouble-shooting these mechanical issues is eliminated as well.
  • HSL-LTA is designed to reject aluminum cans out of the tester discharge conveying (air-tunnel, gravity track, etc).
click to enlarge
 

HSL-LTS: Alcoa Light Tester Pneumatic Reject Control (steel can)
 
  • Replaces existing odd/even mechanical reject mechanism with a reject blow-off solenoid mounted in the tester discharge magnetic conveyor.
  • Increases Production - By eliminating the mechanical reject, and thus the limitations of speed imposed by the response time of the mechanical reject mechanism, significant increases in speed can be achieved.
  • Reduced Downtime - Eliminating the mechanical reject eliminates can jams caused by intermittent or poorly operating reject mechanisms thus reducing scrap and downtime to clear can jams in the machine.
  • Reduced Maintenance - Removing the mechanical reject eliminates maintenance issues relating to mechanisms such as worn or sticking actuators, worn air cylinders, etc. Cost of maintaining and time involved in trouble-shooting these mechanical issues is eliminated as well.
  • HSL-LTS is designed to reject steel cans off a user supplied magnetic discharge conveyor.
click to enlarge
 

HSL-RT6-M45: Reynolds (APM) RT-5/RT-6 Light Tester High Speed Control Package
click to enlarge
  • Reduces scrap - Gated photomultiplier tube eliminates tube saturation problems which in turn eliminates excess good can rejection following a gross leaker or when the machine is run empty.
  • Increased reliability - Gated photomultiplier tube provides dramatic increase in photomultiplier tube life (typical tube life is 1 to 2 years).
  • Improved quality - with increased sensitivity control, the package allows a greater insight into the can making process. Miss-alignment in bodymaker tooling, resulting in thin wall split flanges, can be determined by excess split flange rejects from that bodymaker. Necker/Flanger tooling problems can also be detected from the cans rejected.
  • Interfaces directly with Odd/Even reject solenoids to reject defective cans at speeds up to 3,000 Can Per Minute.
  • Auto Gain calibration feature simplifies system calibration and sensitivity adjustment.
click to enlarge
click to enlarge
 

HSM/HSL Product Line:

Cuppers
Bodymakers
Basecoaters
Decorators
Inside Spray Machines
Necker/Flangers
Light Testers
Fillers/Seamers

Data Sheets by part number

User's Manuals by part number

Set-up Programs by part number

For pricing and availability, contact us.