Systems Engineering Associates, Inc.

Systems Electronics Group, Inc.
14989 W. 69th Avenue Arvada, CO 80007
U.S.A.
Tel: (303) 421-0484
Fax: (303) 421-8108
 
 
Cupping Presses

The following HSM and HSL packages are available for cupping presses. For price and availability, please contact us.

HSM-CUP7: Cupping Press High Speed Logic Module (with die protection)
HSL-CUP4: Cupping Press High Speed Logic Sub-panel (with die protection)
HSL-CUP3: Cupping Press High Speed Logic Sub-panel (w/out die protection)

These packages can be installed on Minster, Sequa (Standun), and Redicon cuppers.

IMPORTANT SAFETY WARNING:

The following packages are intended as high-speed logic gates to provide consistent and accurate clutch control. They are not designed as redundant, dual-processor clutch brake safety modules. The packages must not be the only means of controlling the machine clutch mechanism. Good design practice dictates the use of safety interlocks on any device that starts or stops automatically that can cause personnel injury to operating or maintenance personnel. These packages must be used only in conjunction with industry approved safety interlock contacts, implemented in accordance with ANSI B11.1 safety requirements, otherwise serious personnel injury may result.


HSM-CUP7: Cupping Press High Speed Logic Module
 
  • Reduces tooling damage by accurately detecting die jams/cup jams on up to 16-out presses. De-activates the clutch at TDC to prevent additional stroking at detection of die fault on any station.
  • Provides repeatable air strip control to prevent air stripping and blow-out problems.
  • Accurately controls clutch with brake wear compensation algorithm to stop press at TDC regardless of brake response.
  • Controls: clutch solenoids, air strip solenoids, die jam/cup jam detection, scrap jam detection, and more…
  • Can be used on virtually all types of cupping presses.
  • Module provided for door mounting on the existing user's control cabinet door or console.
click to enlarge

HSM/HSL Product Line:

Cuppers
Bodymakers
Basecoaters
Decorators
Inside Spray Machines
Necker/Flangers
Light Testers
Fillers/Seamers

Data Sheets by part number

User's Manuals by part number

Set-up Programs by part number

For pricing and availability, contact us.

 

download complete data sheet
download user's manual/set-up program


HSL-CUP4: Cupping Press High Speed Logic Sub-panel (with die protection)
click to enlarge
  • Pre-wired version of HSM-CUP7 for ease of installation.
  • Performs identical functions as HSM-CUP7.
  • Sub-panel for mounting inside user's existing control cabinet.

download complete data sheet
download user's manual/set-up program

 

 
HSL-CUP3: Cupping Press High Speed Logic Sub-panel (with-out die protection)
click to enlarge
  • Same as HSL-CUP4 but with-out die protection.
  • Sub-panel for mounting inside user's existing control cabinet.
download complete data sheet
download user's manual